INITRAMFS.CONF(5)                     initramfs.conf manual                     INITRAMFS.CONF(5)

       initramfs.conf - configuration file for mkinitramfs

       The behaviour of mkinitramfs can be modified by its configuration file.

       Each  line  in  the  file can be a configuration variable, a blank line, or a comment. The
       value of an variable is assigned by an statement of the form: name=[value]

       Configuration options can be broken out into configuration snippets and placed in individ‐
       ual  files  in  the  /etc/initramfs-tools/conf.d  directory.   Files in this directory are
       always read after the main configuration file, so you can override  the  settings  in  the
       main config file without editing it directly.

              Specifies the modules for the initramfs image.

              Modules  listed in /etc/initramfs-tools/modules and /usr/share/initramfs-tools/mod‐
              ules.d/* are always included in the initramfs, and are loaded  early  in  the  boot

              list  doesn't  load any additional modules at boot time, other than those listed in
              the above files.

              most adds most file system, all ata, sata, scsi and usb drivers.

              dep tries to guess which modules are necessary for the running box  and  only  adds
              those modules.

              netboot adds the base and network modules, but skips block devices.

              The default setting is most.

              Include  busybox  utilities  for  the boot scripts.  If set to 'n' mkinitramfs will
              build an initramfs without busybox.  Beware that many  boot  scripts  need  busybox

              Specifies  the  compression  method used for the initramfs image.  mkinitramfs will
              default to gzip if the  kernel  lacks  support  (CONFIG_RD)  or  the  corresponding
              userspace utility is not present.

        UMASK Set  the umask value of the generated initramfs file.  Useful to not disclose even‐
              tual keys.

              Amount of RAM to use for RAM-based compressed swap space.  The default  is  not  to
              use compcache.

              An empty value - compcache isn't used, or added to the initramfs at all.

              An integer and K (e.g. 65536 K) - use a number of kilobytes.

              An integer and M (e.g. 256 M) - use a number of megabytes.

              An integer and G (e.g. 1 G) - use a number of gigabytes.

              An integer and % (e.g. 50 %) - use a percentage of the amount of RAM.

              You can optionally install the compcache package to configure this setting via deb‐
              conf and have userspace scripts to load and unload compcache.

        BOOT  Allows one to use an nfs drive as the root of the drive.  The default  is  to  boot
              from local media (hard drive, USB stick).  Set to nfs for an NFS root share.

              Specifies the network interface, like eth0.

        ROOT  Allows  optional  root  bootarg  hardcoding, when no root bootarg can be passed.  A
              root bootarg overrides that special setting.

              Defaults to auto in order to pick up value from DHCP server.  Otherwise you need to
              specify HOST:MOUNT.


       The initramfs-tools are written by Maximilian Attems , Jeff Bailey  and numerous others.  Loosely based on mkinitrd.conf  by  Herbert

        initramfs-tools(8), mkinitramfs(8), update-initramfs(8).

Linux                                       2010/11/22                          INITRAMFS.CONF(5)


Designed by SanjuD(@ngineerbabu)