loop-control <root
LOOP(4)                             Linux Programmer's Manual                             LOOP(4)

NAME
       loop, loop-control - loop devices

SYNOPSIS
       #include 

DESCRIPTION
       The  loop device is a block device that maps its data blocks not to a physical device such
       as a hard disk or optical disk drive, but to the blocks of a regular file in a  filesystem
       or  to another block device.  This can be useful for example to provide a block device for
       a filesystem image stored in a file, so that it can be mounted with the mount(8)  command.
       You could do

              $ dd if=/dev/zero of=file.img bs=1MiB count=10
              $ sudo losetup /dev/loop4 file.img
              $ sudo mkfs -t ext4 /dev/loop4
              $ sudo mkdir /myloopdev
              $ sudo mount /dev/loop4 /myloopdev

       See losetup(8) for another example.

       A  transfer  function  can be specified for each loop device for encryption and decryption
       purposes.

       The following ioctl(2) operations are provided by the loop block device:

       LOOP_SET_FD
              Associate the loop device with the open file whose file descriptor is passed as the
              (third) ioctl(2) argument.

       LOOP_CLR_FD
              Disassociate the loop device from any file descriptor.

       LOOP_SET_STATUS
              Set  the status of the loop device using the (third) ioctl(2) argument.  This argu‐
              ment is a pointer to loop_info structure, defined in  as:

                  struct loop_info {
                      int           lo_number;            /* ioctl r/o */
                      dev_t         lo_device;            /* ioctl r/o */
                      unsigned long lo_inode;             /* ioctl r/o */
                      dev_t         lo_rdevice;           /* ioctl r/o */
                      int           lo_offset;
                      int           lo_encrypt_type;
                      int           lo_encrypt_key_size;  /* ioctl w/o */
                      int           lo_flags;             /* ioctl r/o */
                      char          lo_name[LO_NAME_SIZE];
                      unsigned char lo_encrypt_key[LO_KEY_SIZE];
                                                          /* ioctl w/o */
                      unsigned long lo_init[2];
                      char          reserved[4];
                  };

              The encryption type (lo_encrypt_type) should be one of LO_CRYPT_NONE, LO_CRYPT_XOR,
              LO_CRYPT_DES,   LO_CRYPT_FISH2,   LO_CRYPT_BLOW,  LO_CRYPT_CAST128,  LO_CRYPT_IDEA,
              LO_CRYPT_DUMMY, LO_CRYPT_SKIPJACK, or (since Linux 2.6.0) LO_CRYPT_CRYPTOAPI.

              The lo_flags field is a bit mask that can include zero or more of the following:

              LO_FLAGS_READ_ONLY
                     The loopback device is read-only.

              LO_FLAGS_AUTOCLEAR (since Linux 2.6.25)
                     The loopback device will autodestruct on last close.

              LO_FLAGS_PARTSCAN (since Linux 3.2)
                     Allow automatic partition scanning.

       LOOP_GET_STATUS
              Get the status of the loop device.  The (third) ioctl(2) argument must be a pointer
              to a struct loop_info.

       LOOP_CHANGE_FD (since Linux 2.6.5)
              Switch  the  backing  store  of  the  loop  device  to the new file identified file
              descriptor specified in the (third) ioctl(2) argument, which is an  integer.   This
              operation  is  possible  only  if  the loop device is read-only and the new backing
              store is the same size and type as the old backing store.

       LOOP_SET_CAPACITY (since Linux 2.6.30)
              Resize a live loop device.  One can change the size of the underlying backing store
              and  then  use  this  operation  so that the loop driver learns about the new size.
              This operation takes no argument.

       Since Linux 2.6, there are two new ioctl(2) operations:

       LOOP_SET_STATUS64, LOOP_GET_STATUS64
              These are similar to LOOP_SET_STATUS and LOOP_GET_STATUS described  above  but  use
              the  loop_info64 structure, which has some additional fields and a larger range for
              some other fields:

                  struct loop_info64 {
                      uint64_t lo_device;                   /* ioctl r/o */
                      uint64_t lo_inode;                    /* ioctl r/o */
                      uint64_t lo_rdevice;                  /* ioctl r/o */
                      uint64_t lo_offset;
                      uint64_t lo_sizelimit;/* bytes, 0 == max available */
                      uint32_t lo_number;                   /* ioctl r/o */
                      uint32_t lo_encrypt_type;
                      uint32_t lo_encrypt_key_size;         /* ioctl w/o */
                      uint32_t lo_flags;                    /* ioctl r/o */
                      uint8_t  lo_file_name[LO_NAME_SIZE];
                      uint8_t  lo_crypt_name[LO_NAME_SIZE];
                      uint8_t  lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
                      uint64_t lo_init[2];
                  };

   /dev/loop-control
       Since Linux 3.1, the kernel provides the /dev/loop-control device, which permits an appli‐
       cation to dynamically find a free device, and to add and remove loop devices from the sys‐
       tem.  To perform these operations, one first opens /dev/loop-control and then employs  one
       of the following ioctl(2) operations:

       LOOP_CTL_GET_FREE
              Allocate  or  find  a  free  loop device for use.  On success, the device number is
              returned as the result of the call.  This operation takes no argument.

       LOOP_CTL_ADD
              Add the new loop device whose device number is specified as a long integer  in  the
              third ioctl(2) argument.  On success, the device index is returned as the result of
              the call.  If the device is already allocated, the call fails with the  error  EEX‐
              IST.

       LOOP_CTL_REMOVE
              Remove  the  loop  device whose device number is specified as a long integer in the
              third ioctl(2) argument.  On success, the device number is returned as  the  result
              of the call.  If the device is in use, the call fails with the error EBUSY.

EXAMPLE
       The  program below uses the /dev/loop-control device to find a free loop device, opens the
       loop device, opens a file to be used as the underlying storage for the  device,  and  then
       associates  the  loop  device  with the backing store.  The following shell session demon‐
       strates the use of the program:

           $ dd if=/dev/zero of=file.img bs=1MiB count=10
           10+0 records in
           10+0 records out
           10485760 bytes (10 MB) copied, 0.00609385 s, 1.7 GB/s
           $ sudo ./mnt_loop file.img
           loopname = /dev/loop5

   Program source

       #include 
       #include 
       #include 
       #include 
       #include 
       #include 

       #define errExit(msg)    do { perror(msg); exit(EXIT_FAILURE); \
                               } while (0)

       int
       main(int argc, char *argv[])
       {
           int loopctlfd, loopfd, backingfile;
           long devnr;
           char loopname[4096];

           if (argc != 2) {
               fprintf(stderr, "Usage: %s backing-file\n", argv[0]);
               exit(EXIT_FAILURE);
           }

           loopctlfd = open("/dev/loop-control", O_RDWR);
           if (loopctlfd == -1)
               errExit("open: /dev/loop-control");

           devnr = ioctl(loopctlfd, LOOP_CTL_GET_FREE);
           if (devnr == -1)
               errExit("ioctl-LOOP_CTL_GET_FREE");

           sprintf(loopname, "/dev/loop%ld", devnr);
           printf("loopname = %s\n", loopname);

           loopfd = open(loopname, O_RDWR);
           if (loopfd == -1)
               errExit("open: loopname");

           backingfile = open(argv[1], O_RDWR);
           if (backingfile == -1)
               errExit("open: backing-file");

           if (ioctl(loopfd, LOOP_SET_FD, backingfile) == -1)
               errExit("ioctl-LOOP_SET_FD");

           exit(EXIT_SUCCESS);
       }

FILES
       /dev/loop*: the loop block special device files

SEE ALSO
       losetup(8), mount(8)

COLOPHON
       This page is part of release 4.04 of the Linux man-pages project.  A  description  of  the
       project,  information  about  reporting  bugs, and the latest version of this page, can be
       found at http://www.kernel.org/doc/man-pages/.

Linux                                       2015-05-07                                    LOOP(4)

Go-to-top  




Designed by SanjuD(@ngineerbabu)

<>