tc-fq <root
FQ(8)                                         Linux                                         FQ(8)

NAME
       Fair Queuing (FQ) - Traffic Pacing

SYNOPSIS
       tc qdisc ... fq [ limit PACKETS ] [ flow_limit PACKETS ] [ quantum BYTES ] [ initial_quan‐
       tum BYTES ] [ maxrate RATE ] [ buckets NUMBER ]  [ pacing | nopacing ]

DESCRIPTION
       FQ (Fair Queue) is a classless packet scheduler meant to be mostly used for locally gener‐
       ated traffic.  It is designed to achieve per flow pacing.  FQ does flow separation, and is
       able to respect pacing requirements set by TCP stack.  All packets belonging to  a  socket
       are  considered  as  a  'flow'.  For non local packets (router workload), packet rxhash is
       used as fallback.

       An application can specify a maximum pacing rate using the  SO_MAX_PACING_RATE  setsockopt
       call.   This packet scheduler adds delay between packets to respect rate limitation set by
       TCP stack.

       Dequeueing happens in a round-robin fashion.  A special FIFO queue is  reserved  for  high
       priority packets ( TC_PRIO_CONTROL priority), such packets are always dequeued first.

       FQ is non-work-conserving.

       TCP pacing is good for flows having idle times, as the congestion window permits TCP stack
       to queue a possibly large number of packets.  This removes the  'slow  start  after  idle'
       choice,  badly  hitting large BDP flows and applications delivering chunks of data such as
       video streams.

PARAMETERS
   limit
       Hard limit on the real queue size. When this limit is reached, new packets are dropped. If
       the  value  is lowered, packets are dropped so that the new limit is met. Default is 10000
       packets.

   flow_limit
       Hard limit on the maximum number of packets queued per flow.  Default value is 100.

   quantum
       The credit per dequeue RR round, i.e. the amount of bytes a flow is allowed to dequeue  at
       once.  A  larger  value  means  a  longer time period before the next flow will be served.
       Default is 2 * interface MTU bytes.

   initial_quantum
       The initial sending rate credit, i.e. the amount of bytes a new flow is allowed to dequeue
       initially.   This  is specifically meant to allow using IW10 without added delay.  Default
       is 10 * interface MTU, i.e. 15140 for 'standard' ethernet.

   maxrate
       Maximum sending rate of a flow.  Default is unlimited.  Application specific  setting  via
       SO_MAX_PACING_RATE is ignored only if it is larger than this value.

   buckets
       The size of the hash table used for flow lookups. Each bucket is assigned a red-black tree
       for efficient collision sorting.  Default: 1024.

   [no]pacing
       Enable or disable flow pacing. Default is enabled.

EXAMPLES
       #tc qdisc add dev eth0 root fq
       #tc -s -d qdisc
       qdisc fq 8003: dev eth0 root refcnt 2 limit 10000p flow_limit 100p  buckets  1024  quantum
       3028 initial_quantum 15140
        Sent 503727981 bytes 1146972 pkt (dropped 0, overlimits 0 requeues 54452)
        backlog 0b 0p requeues 54452
         1289 flows (1289 inactive, 0 throttled)
         0 gc, 31 highprio, 27411 throttled

SEE ALSO
       tc(8), socket(7)

AUTHORS
       FQ was written by Eric Dumazet.

iproute2                                   10 Sept 2015                                     FQ(8)

Go-to-top  




Designed by SanjuD(@ngineerbabu)

<>